Bobsled Run Update

revised switch-engine 'bobsled run' using boats as catalysts:  David Bell, 2 July 2005 On July 2, David Bell noticed that tub-with-tails are larger than needed to form switch-engine lanes (see the bobsled-run posting on 24 June 2005). Several smaller still lifes with tub-shaped protrusions can provide the same catalysis; boats, barges, long boats, long barges, etc. can all be used. At right is a revised switch-engine 'bobsled run' using boats as catalysts.

P3450 switch-engine swimmer based on a p9660 swimmer by David Bell, 2 July 2005 Long barges can be used as a common boundary between two adjacent lanes without any possible interference. Barges are sufficient if traffic in adjacent lanes is in opposite directions, or if the timing of traffic in two parallel lanes can be controlled to avoid mirror-image switch-engine phases. At right is a p3450 'swimmer' -- a switch engine doing laps in a lane made of boats:

(Disclaimer— I have no association with anyone or any organization, and speak only for myself. Links and quotes are provided for information only.)